Developments



Boring cutting tool with micrometric adjustment

55.png
The use of this tool in the metal treatment will increase the precision of boring tools by eliminating the gaps that occur in the micrometer screw pair.
Просмотров сегодня: 0 | Просмотров всего: 0 | Категории: Mechanical engineering | Аспирант |


The Automated technology of drawing thin-film strengthening siliceous protective coatings

51.1.png
Hardening of metal surfaces by drawing thin-film coverings is the resource-saving technology, allowing to reach required results with the minimum material and energy costs.
Просмотров сегодня: 0 | Просмотров всего: 0 | Категории: Chemistry | Mechanical engineering | Metallurgy | Студент |


Nanocomposite materials and coatings for the domestic production of motor units

50.1.png
Nanocomposite materials and coatings, developed on the basis of secondary polymers and modified nanodisperse particles, intended for the manufacture of defense products cardan transmissions automotive, agricultural machinery and other construction products and packaging materials. The developed composite material will be used for various types of packaging bags, packaging. In the future, to expand the market for composite materials developed by the CIS and foreign countries plan to expand the range of products, in particular, molded construction elements, large-diameter pipes and elements of small architectural forms.
Просмотров сегодня: 0 | Просмотров всего: 0 | Категории: Automobile industry | Mechanical engineering | Аспирант |


Hydrophilic zol-gel coatings for everyday and industrial uses

47.png
Zol-gel method is a technology to produce materials with definite chemical and physical-mechanical properties, including zol production and its successive conversion into gel. Zol-gel conversions need water molecules or non-organic compounds with hydroxyl groups (ОН-), which initiate hydrolysis and polycondensation reactions.
Просмотров сегодня: 0 | Просмотров всего: 0 | Категории: Automobile industry | Instrument making | Mechanical engineering | Medicine and pharmacy | Студент |


Software and hardware to diagnose the condition of lubricants with the help of acoustic emission method

27.1.png
The hardware and software complex is designed to assess the condition of lubricating materials and functional coatings on the parameters of acoustic emission, caused by friction.
Просмотров сегодня: 0 | Просмотров всего: 0 | Категории: Automobile industry | Mechanical engineering | Transport industry | Студент |


Rubber sleeves with carbon coating

26.png
A thin wear resistant coating is deposited on the surface during pulsed plasma processing of cuffs in a vacuum, of a few tens of nanometers. Higher mechanical properties and nanostructuring coating provides wear resistance and reduced coefficient of cuff friction on the shaft journal. Reduced friction results in a decrease of heating in the friction zone, which leads to slow aging and cuff increases its service life.
Просмотров сегодня: 0 | Просмотров всего: 0 | Категории: Aircraft industry | Automobile industry | Mechanical engineering | Аспирант |


Robotized complex for model processing and molding

2.png
Robotized complex has a high degree of automation. The use of complex for model processing and molding will greatly facilitate the working conditions, eliminate human factor and improve the culture of production.
Просмотров сегодня: 0 | Просмотров всего: 0 | Категории: Mechanical engineering | Студент |


Design of a fence of room type of the rig

Creation of state-of-the-art design of a protective fence and use of the most effective paperless production engineering.
Просмотров сегодня: 0 | Просмотров всего: 0 | Категории: Mechanical engineering | Студент |


Composition tribotechnical and sealing materials on the basis of polytetrafluoroethylene (PTFE)

13.png
The compositions both technique of deriving and processing nanocompjsition tribotechnical and sealing materials designed on the basis of polytetrafluoroethylene (PTFE). The materials are intended for manufacture of devices of clusters of abrasion and sealing of systems (stationary and dynamic), operated at the factor PV < 20 MPa m/s, environment temperature up to 250ºС at lackof exterior lubricant.
Просмотров сегодня: 0 | Просмотров всего: 0 | Категории: Mechanical engineering | Аспирант |


Protective anti-corrosion sol-gel films

16.png
The application of these techniques can solve a number of critical issues, including the creation of heat-resistant, and the elements included in the design of gas ranges, operating at high temperatures to which high demands are placed on the preservation of decorative properties in operation and high durability, resistance to abrasion.
Просмотров сегодня: 0 | Просмотров всего: 0 | Категории: Instrument making | Mechanical engineering | Metallurgy | Аспирант |
Syndicate content